Certifications, Standards
& Compliance

We engineer to the standards that govern hospital operation in India and internationally — not as a checkbox, but as a baseline for every design decision.

Roydon MEP - Standards

Healthcare Accreditation

NABH
National Accreditation Board for Hospitals & Healthcare Providers
All MEP systems designed to support NABH Entry Level and Full Accreditation — environment of care, infection control, patient safety, facility management. Documentation in NABH-ready format from handover.
Applied to: All hospital projects
NABL
National Accreditation Board for Testing & Calibration Laboratories
MEP for NABL-accredited labs — temperature-controlled storage, validated HVAC, electrical conditioning and clean water supply to ISO 15189 facility requirements.
Applied to: Laboratories, diagnostic centres
ASHRAE 170
Ventilation of Health Care Facilities
Primary standard for healthcare HVAC — ACH rates, pressure relationships, temperature, humidity and filtration for every clinical area from OT to ward. Applied to all our HVAC designs as standard.
Applied to: All HVAC systems

Fire & Life Safety

NFPA 99
Health Care Facilities Code
Comprehensive standard for health care facility systems — medical gas, electrical, HVAC and fire protection. Referenced for all MGPS and electrical system design, installation and testing.
Applied to: MGPS, electrical, HVAC
NFPA 13
Standard for Installation of Sprinkler Systems
Automatic sprinkler system design for hospitals — OH2 hazard classification, 5 mm/min density, 216 m² design area, hydraulic calculation methodology.
Applied to: Sprinkler systems
NFPA 101
Life Safety Code
Egress design, occupancy loads, travel distances, refuge area sizing, compartmentation for hospital occupancies including the specific healthcare occupancy chapter.
Applied to: Fire egress, life safety
NBC 2016
National Building Code of India
Parts 4 (Fire), 8 (MEP) and 9 (Plumbing) of NBC 2016 — the baseline for all Indian hospital MEP works. Fire protection, ventilation, electrical and sanitation requirements.
Applied to: All disciplines
IS 2189
Fire Detection & Alarm Systems
Indian standard for fire detection and alarm systems — addressable systems, detector spacing, zone layouts, alarm verification and panel specifications for hospital occupancies.
Applied to: Fire alarm systems
IS 3844
Internal Fire Hydrant Systems
Wet riser, landing valve, hose reel and hydrant system design — flow rates, pipe sizing, pump capacity and testing for healthcare occupancies.
Applied to: Fire hydrant systems

Medical Gas & Electrical

HTM 02-01
Medical Gas Pipeline Systems
UK Health Technical Memorandum — the most comprehensive MGPS design, installation and testing standard. Used as the benchmark for all our MGPS installations globally.
Applied to: All MGPS installations
IS 732 / IEC 60364-7-710
Electrical Installation in Medical Locations
Isolated power systems (IT), equipotential bonding in OTs and ICUs, insulation monitoring, special socket requirements for OTs and cardiac care areas.
Applied to: OT, Cath Lab, ICU power
IS 3043 / SMACNA / CEA
Earthing, Ductwork & HT Standards
IS 3043 for TN-S earthing and lightning protection. SMACNA for GI ductwork construction. CEA regulations for HT electrical installations above 1 kV.
Applied to: Earthing, HVAC, HT electrical

Why Compliance Is Our Baseline

🛡️

NABH Ready

All documentation in NABH-ready format from handover

🔥

Fire NOC Support

As-built drawings and inspection support for fire authority

Electrical Safety

CEA-compliant HT/LT installations with full test reports

🌡️

HVAC Commissioning

Air balance reports, particle counts, pressure certificates